Standard foils are regularly available from stock.  They are categorized by their areal density, with minimal variation (+/- 10% or +/- 0.2µg/sq.cm for the thinnest foils).  Tighter tolerances are available by quote. The areal density of our foils, also known as surface density, specific density, or mass per unit area, is in units of micrograms per square centimeter.  Foils are measured optically and/or by weighing in order to maximize accuracy.  Please see the ACF-Metals' "Product Information" for more properties of these foils, especially for information regarding flatness, smoothness, and light-tightness.

Foils below 5.0µg/sq.cm may be difficult to mount over apertures larger than a few mm in diameter.  When requested, ACF-Metals will add an additional coating of collodion on one side of the carbon foil.  This provides additional support for the foil, and for some users, a longer foil lifetime.

In order to minimize issues associated with naturally occurring pinholes, some investigators will use multiple layers of carbon foils.  Light tightness may be particularly important when foils are used as optical filters, neutralizer foils, and windows for low-pressure gas-cell targets.  ACF-Metals offers layered carbon foils in certain thicknesses.  Note: Pinholes are observed to form spontaneously in hybrid type boron-carbon foils at temperatures above 1800 K, another reason why ACF-Metals does not offer hybrid foils.

동일한 크기와 면적 밀도의 탄소 포일을 단품으로 주문하시는 경우, 수량 할인이 적용됩니다. 100개 이상 주문 시 5%, 1000개 이상 주문 시 10% 할인됩니다. 이 할인이 적용되는 주문은 ACF-Metals에 직접 문의해 주세요.

위의 주요 내용과 추가적으로 도움이 되는 정보를 자세히 알아보려면 무료 제품 정보 사본을 요청하세요!