Standard foils are regularly available from stock.  They are categorized by their areal density, with minimal variation (+/- 10% or +/- 0.2µg/sq.cm for the thinnest foils).  Tighter tolerances are available by quote. The areal density of our foils, also known as surface density, specific density, or mass per unit area, is in units of micrograms per square centimeter.  Foils are measured optically and/or by weighing in order to maximize accuracy.  Please see the ACF-Metals' "Product Information" for more properties of these foils, especially for information regarding flatness, smoothness, and light-tightness.

Foils below 5.0µg/sq.cm may be difficult to mount over apertures larger than a few mm in diameter.  When requested, ACF-Metals will add an additional coating of collodion on one side of the carbon foil.  This provides additional support for the foil, and for some users, a longer foil lifetime.

In order to minimize issues associated with naturally occurring pinholes, some investigators will use multiple layers of carbon foils.  Light tightness may be particularly important when foils are used as optical filters, neutralizer foils, and windows for low-pressure gas-cell targets.  ACF-Metals offers layered carbon foils in certain thicknesses.  Note: Pinholes are observed to form spontaneously in hybrid type boron-carbon foils at temperatures above 1800 K, another reason why ACF-Metals does not offer hybrid foils.

Des remises sur quantité sont offertes pour les commandes groupées de feuilles de carbone de même dimension et de même densité surfacique : 5 % (à partir de 100 unités) ou 10 % (à partir de 1 000 unités). Veuillez contacter directement ACF-Metals pour bénéficier de ces remises.

Veuillez demander un EXEMPLAIRE GRATUIT de notre FICHE D'INFORMATION PRODUIT pour plus de détails sur les points saillants ci-dessus et pour des informations utiles supplémentaires !